Brass Brazing Alloys

Brass brazing alloys

can be used for brazing and for the Oxy-Fuel Gas Braze-Welding process, with liquid flux spread through the torch flame.  Brass Brazing Alloys are mainly used for welding among copper, steel and iron.  Most of the common (and easy to use) brazing alloys. It's a low cost and good physical ability brazing alloy brazing carbon steel, cast iron, hard carbide tools etc.  Brass brazing alloys are widely used in bicycle frame, diamond tools, metal process, marine repair industries. BEIDUO Alloys offers an extensive range of copper and silver brazing alloys to suit your welding applications, a wide variety of brazing, welding and soldering alloys for joining most applications encountered in the field.

Get Your Free Quote

We will contact you within 24 hours.

    Standard Alloy Chemical Composition(%) Melting Range Application
    Solidus Liquidus
    AWS A5.8
    BS EN14640
    RBCuZn-A
    CuZn40
    Cu:59 Sn:0.6 Zn:Bal. Other:0.5 886℃ 901℃ Braze welding of copper,steel and cast iron.
    AWS A5.8
    BS EN14640
    RBCuZn-B
    CuZnNi
    Cu:58 Fe:0.7 Si:0.1 Mn:0.5 Ni:0.5 Sn:1.0  Zn:Bal. Other:0.5 866℃ 882℃ Gas welding and carbon arc welding of brass,also braze welding of copper,steel and cast iron.
    AWS A5.8 RBCuZn-C Cu:58 Fe:0.7 Si:01 Mn:0.5  Sn:1.0  Zn:Bal. Other:0.5 866℃ 888℃ Gas welding and carbon arc welding of brass,also braze welding of copper,steel and cast iron.
    AWS A5.8
    BS EN14640
    RBCuZn-D
    CuZn40Ni10
    Cu:48 Si:0.1 Ni:10.0  P: Max0.25 Zn:Bal. Other:0.5 921℃ 935℃ German Silver. Braze welding of steel, nickel and carbide alloys
    HS221 Cu:59 Sn:1.0 Si:0.2  Zn:Bal. Other:0.5 875℃ 890℃ Gas welding and carbon arc welding of brass,also braze welding of copper,steel and cast iron.
    Cu48ZnNi9Ag Cu:48 Zn:Bal.  Ag:1 Ni:9 Si:0.2 Other:0.5 890℃ 920℃ High-strength brazing alloy, usually used for joints requiring high mechanical resistance characteristics.

    Shapes:

    Rods φ1.6-5.0mm      Length: 200-1000mm
    Wires φ0.5-1.6mm   Spools and Coils
    Coated rods φ1.6-4.8mm   Length: 200-1000mm
    Strips Thickness: 0.2-1.0mm   Width: 1.3-100mm
    Rings Min. inner diameter: 2.5mm    available layers ring
    Buttons and Sheet  Available